I may not be on my blog, but I'm on Instagram!

Tuesday, October 13, 2015

Have you met Eek-Katerina yet?

Hiya!
This post was a few weeks in the making. . . Because it took me a few weeks to make "her."

Not that she is super hard to make, but because life kept getting in the way. Oy! 😕

Every time I sat down to work on her, I was called away to do something else. 


And then Fall Break occurred which meant my son was out of school. So, we decided that meant it was necessary for us to take a lovely trip to Anaheim to visit Disneyland. 😎

Truthfully, we both deserved that after all the doctor appointments to check his ears and eyes. We both needed a bit of escapism after all that reality! 😜

And then of course I decided I "knew" the next step and jumped ahead in my rush to finish her and then realized I screwed up, which resulted in ripping up what was glued on.... Yeah. 😱😲 (did you notice the ripped up paper in the previous Katerina pic?) I didn't have another piece of the same paper so I really didn't have a choice: I could not start over. I needed to come up with a solution. As a result, I think I came up with a nice fix. Keep reading....


Her skirt and apron panels are finally attached properly (ahem)... ☺️ ...along with her big sleeves. (Just a tad bit '80s, am I right?)
Next came her hair. Lots of hair!

I curled the hair before I even started the body because I wasn't sure if it would work... if I'd like it... how much I'd need... Jodie gives great instructions on her NeedlesnKnowledge site on how to curl the cotton twine. As it turns out my knitting needles were fatter and longer than hers. So I ended up with quite a bit more curled twine than was probably necessary. 
(Yes... In case you missed it, another great reminder of my huge mistake can be seen in the above pic. Just keeping it real, people.)


She's looking quite girlie now. Love it! 


I decided she needed a hat instead of the batty crown that came in the file. This hat comes from the Witch 3D mini Hat from Snapdragon Snippets. 


Katerina came with a star and moon banner set in the file. I decided to create something else. Using Silhouette Design Studio I created the banner pieces and glittered them up to make them really festive.


And if you've gotten this far then you will be pleased to see the final product! Woohoo! 
She is a gift for my mother who has an October birthday. 🎉🎂🎃🎁👻
I'm pretty sure she doesn't even know I have a blog, let alone read it. So I'm pretty safe posting the pics for you all. 
Well, I've taken up quite a lot of your time. Hope it was worth it for you. Thank you so much for visiting.  Have a wonderful day!
Toddles......

PS: Didn't see my fix? Well, I made Katerina a cape from a scrap of black cardstock. If you didn't know it wasn't supposed to be there, you'd never know it. 😎 You can just see it peeking out at her sides in the above pic. Below is a picture of her back. What do think? I did ok, right? Since her wings were smooth, I decided to crinkle to cardstock for the cape for added texture and to give it a more fabric-like appearance. 


Tools:
Paper: Halloween (K&Co)
Cardstock: black (Recollections), creamy peach (Paper Studio)
Adhesive: 1/4" tape (Scor-Tape), 1/4" tape (ATG), Quick Dry Adhesive (Scotch), viscose (Beacon)
Other: glitter glue (Ranger), embroidery floss (DMC), beads (Hobby Lobby), ribbon (Michael's), black seam binding (HugSnug), twine (Annie's Paper Boutique)
Software: Silhouette Design Studio
Hardware: Silhouette Cameo, scissors, hot glue gun, sewing needles

Monday, October 12, 2015

Witch's hats and Brooms treats

Hiya!
Have you decorated for Halloween yet? My son is at the age where he is all about making sure our house is decorated inside and out for all important holidays. (I.e: Halloween and Christmas) I have to admit that it put me in the mood to make some fun treats for my friends.


The Witch's Broom idea came about because I needed to do something with some candy sticks I purchased and had not used yet. I ended up using the Mini 3D Witch's Broom file from Snapdragon Snippets. I sized it down a wee bit since the candy stick was not as long as the design's broomstick. 
I wrapped the two different layers of broom around the candy stick using some strong double-sided tape, then tied some fun orange and black bakers twine to finish it off.


(Here's a pic of the broom using the original size file.)

As cute as the broom was it was missing something. Thus, the Witch Hat. The idea came from a Chick'n Scratch video I saw. She used a pine tree and a couple circle punches to make her hats. I created a single shape in Silhouette Design Studio. She also used a bow paper punch to accessorize her hat. I created a bow in Silhouette with only two pieces that gave me a nearly identical result. She used black glitter paper for her hats. I used regular black cardstock which I then added shimmer to using a gel pen. She used glue dots to adhere. I used white quick drying adhesive. (Tomato-Tomato, right?)

Love fun projects like this that come together so easily but give a big bang for the buck.
Thanks again for visiting. Hope you have a wonderful day!
Toddles.......

Tools:
Paper: Halloween (K&Co)
Cardstock: black, kraft, brown (Recollections
Adhesive: Quick Dry (Scotch), double-sided tape (Scor-Tape)
Other: Stardust gel pen (Sakura), mini clothes pins (Walmart), bakers twine (Target)

Rexburg Idaho Temple card

Hiya! 
The last couple months have been a bit of a blur. I can't believe my son is already finishing his Fall Break and returning back to school in a couple days. It's already mid-October?! Crazy!
Well, a couple months ago a friend of mine got married. I gifted her some small yet fun banners for part of her shower gift...





I had also made a Fourth of July banner but somehow didn't snap a picture before I gifted it. 😨
I also create the shower invites and wedding announcements, assisted with setting up for their reception, and where ever I was asked to help. All-total, it was six months of crafty preparation for her daughter's big day. The happy couple got married in the Gilbert Arizona LDS Temple. Typically I give a card that has the location on it of where they wed. But since I've known the bride for many years she already had something with the Gilbert Temple on it. So I asked her if she'd like something else. She requested the Rexburg Temple since she and her new hubby would be living near that temple for at least a few years. Thus, this card was created:


These dimensional creations are so fun. They are a challenge too, but I love that part of it!
Anyway, that's it for today. I plan to be posting a few other odds and ends that I haven't had a chance to post yet. Some are recent creations, others have been sitting on the shelf for a while. 


Thanks for visiting! Hope you have a terrific day!
Toddles.....

Tools
Cardstock: Gold Shimmer (PaperTreyInk), Black (Recollections), White (GeorgiaPacific)
Paper: Valentines (Recollections), St. Patrick's (Recollections), Halloween (K&Co)
Software: Adobe Illustrator, Silhouette Design Studio
Hardware: Silhouette Cameo, scissors, hot glue gun
Other: stardust gel pen (Sakura)